HANGONG can design equipment for autoclave, autoclave and other equipment according to the actual needs of laboratory and factory.
A series
Multiple versions of four, eight or more types of autoclaving series. For multiple reactions, the individual can be heated, cooled and controlled individually. Provide all valve connections, pressure gauges and pressure protection.
V series
It can be used in oil temperature thermostat, and can also be used on electric heating board with agitator driver and internal magnetic stirring rod.
P series
The pneumatic cylinder makes the reaction vessel rise or fall away from the cover, so that the fittings on the cover of the reactor can be fixed and installed. The cooling water valve and pneumatic controller are integrated into the rear wall of the reactor chassis and enter through the front service port. The flexible agitator shaft connects the magnetic coupler to the drive motor mounted on the chassis at the overhead position.
T series
The spiral spring tube ensures the flexible connection from the autoclave cover to the pressure station and moves the cover and its fittings away to the fixed ring. The bracket has a header for easy connection with the control unit, which also accommodates the rotating clamp of the agitator motor and the whole pressure station. Fast closing up to 200bar and the exchangeability of reaction vessel.
H series
The autoclave cover rises from the cylinder. The cap has an extended bolt and nut seal, a flange seal O - ring seal, and a planar seal.

A series

V series

P series

H series

See product introduction, specific selection

HANGONG Integrated Systems Catalog.pdf